Alcatel Lucent Compatible 25G SFP28 Transceiver CWDM 1370nm 10km DOM LC
Alcatel-Lucent Compatible 25G CWDM SFP28 1270nm-1370nm 10km DOM LC SMF Optics Tranceiver
Product Features
● Supports up to 25.78Gb/s bit rates
● compliant to IEEE 802.3cc
● compliant to SFF-8402 for SFP28 solution
● Digital Diagnostic Monitor Interface with SFF-8472
● Hot pluggable SFP+ footprint
● 1271nm ,1291nm,1311nm,1331nm ,1351nm,1371nm CWDM transmitter
● Applicable for 10Km SMF connection
● High transmission margin
● Low power consumption<1.5W
● Single 3.3V power supply
● Operating case temperature:
Commerical:0 to 70 °C Exceptional:-20 to 80 °C
Applications
● 25.78 Gb/s single lane
● Other optical links
Product Descriptions
Wavelength:1271nm ,1291nm,1311nm,1331nm,1351nm,1371nm CWDM DFB transceiver
Its Features:
- It is designed for use in 25Gb/s data rateover single-mode fiber for link length 10Km.
- The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links.
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(E) =-20 to 80℃,VCC = 3.13 to 3.47 V)
| Parameter |
Symbol |
Min. |
Typ |
Max. |
Unit |
Note |
| Transmitter |
| Operating Wavelength |
λ |
-6.5nm |
1271,1291,
1311,1331,
1351,1371
|
+6.5nm |
nm |
|
| Ave. output power (Enabled) |
PAVE |
0 |
|
+6 |
dBm |
1 |
| Side-Mode Suppression Ratio |
SMSR |
30 |
|
|
dB |
|
| Extinction Ratio |
ER |
3.5 |
|
|
dB |
|
| RMS spectral width(-20dB) |
Δλ |
|
|
1 |
nm |
|
| Dispersion penalty |
TDP |
|
|
2,4,4.5 |
dB |
|
| Relative Intensity Noise |
RIN |
|
|
-130 |
dB/Hz |
|
| Receiver |
| Operating Wavelength |
|
1260 |
|
1610 |
nm |
|
| Receiver Sensitivity(OMA) |
PSen |
|
|
-13.8 |
dBm |
3 |
| Average Receiver Power |
Pimax |
-13.3 |
|
2 |
dBm |
|
| LOS Assert |
Pa |
-30 |
|
|
dBm |
|
| LOS De-assert |
Pd |
|
|
-12 |
dBm |
|
| LOS Hysteresis |
Pd-Pa |
0.5 |
|
5 |
dB |
|
Notes:
1. Average power figures are informative only, per IEEE 802.3cc..
2. Measured at the BER less than 5E-5, back to back. The measure pattern is PRBS 231-1 with worst ER=4.5@ 25.78Gb/s.
High Reliable Optical Components and Excellent Design
1. DLB laser and PIN photodiode
- Long transmission distance.
- High speed and performance
2. Thick Gold Finger
- Stable operation
- Repeated plug and unplug
3. Plating Hard Gold Shell
- Good heat dissipation
- Can't be deformed easily
- Anti-electromagnetic interference
Cost-effective and Reliable Transmission
- Low power consumption and low latency allow your network devices to work efficiently
- DOM function supports real-time monitoring for transceiver status.
Our all modules have 3 years warranty
