1550nm 80km 10G SFP+ Optical Transceiver
Cisco SFP-10G-ZR-C Compatible 10G-ZR SFP+ 1550nm 80km SMF Transceiver Module
Product Descriptions
1. Type: SFP+
2. Compatibility: Multi-Vendor MSA Compatible
3. Tx/Rx Wavelength: 1550 nm. / 1550 nm.
4. Media Type: Single-Mode Fiber (SMF)
5. Max. Distance: 80 km
6. Data Rate: 1.25-10.31 Gbps
7. Temperature: Standard 0°-70°C
Technical Data
| TX Wavelength: |
1550 nm. |
Media Type: |
Single-Mode Fiber (SMF) |
| RX Wavelenght: |
1550 nm. |
Maximum Distance: |
80km |
| Supported Data Rate: |
1.25-10.31 Gbps |
Supported Applications: |
10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps), STM-64 (9.95Gbps) |
| Connectors: |
Double LC |
Transmitter Type: |
EML Laser |
| Minimum Transmitting Power: |
0 dB |
Receiver Type: |
APD Photodiode |
| Maximum Transmitting Power: |
5 dB |
Compliance: |
CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, INF-8074i, RoHS, SFP MSA |
| Receiver Sensitivity: |
-23 dBm |
Power: |
CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, RoHS, SFF-8431, SFP MSA |
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter |
Symbol |
Min. |
Typ |
Max. |
Unit |
Note |
| Transmitter |
| Operating Wavelength |
λ |
1543 |
1550 |
1557 |
nm |
|
| Ave. output power (Enabled) |
PAVE |
0 |
|
5 |
dBm |
1 |
| Side-Mode Suppression Ratio |
SMSR |
30 |
|
|
dB |
|
| Extinction Ratio |
ER |
8.2 |
|
|
dB |
|
| RMS spectral width |
Δλ |
|
|
1 |
nm |
|
| Relative Intensity Noise |
RIN |
|
|
-128 |
dB/Hz |
|
| Output Optical Eye |
Compliant with IEEE 0802.3ae |
| Receiver |
| Operating Wavelength |
λ |
1260 |
|
1610 |
nm |
|
| Receiver Sensitivity |
PSEN1 |
|
|
-24 |
dBm |
2 |
| Recevier Reflectance |
Rrx |
|
|
-27 |
dB |
|
| Overload |
PAVE |
-7 |
|
|
dBm |
|
| LOS Assert |
Pa |
-37 |
|
|
dBm |
|
| LOS De-assert |
Pd |
|
|
-28 |
dBm |
|
| LOS Hysteresis |
Pd-Pa |
0.5 |
|
|
dB |
|
Notes:
1. Measured with worst ER=9dB
2. PRBS 231 – 1 and BER<10-12@10.3125G
Product Features
● Supports 9.95 to 11.3Gb/s bit rates with Dual CDR
● Duplex LC connector
● Hot pluggable SFP+ footprint
● Cooled 1550nm EML transmitter, APD receiver
● Applicable for 80km SMF connection
● Low power consumption, < 1.5W
● Digital Diagnostic Monitor Interface
● Optical interface compliant to IEEE 802.3ae 10GBASE-ZR
● Electrical interface compliant to SFF-8431,SFF-8432
● Operating case temperature:
Commerical:0 to 70 °C
Applications
● 10GBASE-ZR at 10.3125Gbps
● OTN G.709 OTU1e/2/2e
● 4x, 8x and 10x 10G Fiber Channel
● Other optical links
Product Brief
Olinkcom’s OLSP551XL-CD80 transceivers are Enhanced Small Form Factor Pluggable SFP+ transceivers designed for use in 10-Gigabit multi-rate links up to 80km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432 and support 10G Ethernet ZR and 10G Fibre Channel.Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for telecommunication and datacom.
