Extreme Networks 10GB-ZR100-SFP Compatible 10GBASE-ZR SFP+ 1550nm 100km Transceiver
This Extreme Networks compatible SFP+ ZR transceiver provides 10GBase-ZR throughput up to 80km over single-mode fiber (SMF) using a wavelength of 1550nm via an LC connector. It is guaranteed to be 100% compatible with the equivalent Extreme Networks equipment. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters.
Features
|
INTERFACE TYPE:
|
10G
|
|
FIBER TYPE:
|
single-mode
|
|
TRANSCEIVER FORMAT:
|
SFP+
|
|
WAVELENGTH:
|
1550nm
|
|
TX DISTANCE:
|
100km
|
|
CONNECTORS:
|
LC
|
Absolute Maximum Ratings
| Parameter |
Symbol |
Min. |
Max. |
Unit |
Note |
| Supply Voltage |
Vcc |
-0.5 |
4.0 |
V |
|
| Storage Temperature |
TS |
-40 |
85 |
°C |
|
| Relative Humidity |
RH |
0 |
85 |
% |
|
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.
General Operating Characteristics
| Parameter |
Symbol |
Min. |
Typ |
Max. |
Unit |
Note |
| Data Rate |
DR |
9.953 |
10.3125 |
11.3 |
Gb/s |
|
| Supply Voltage |
Vcc |
3.13 |
3.3 |
3.47 |
V |
|
| Supply Current |
Icc5 |
|
|
450 |
mA |
|
| Operating Case Temp. |
Tc |
0 |
|
70 |
°C |
|
| TI |
-40 |
|
85 |
|
Digital Diagnostic Specifications
The OLSP551XL-C(I)DH1 transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.
| Parameter |
Symbol |
Units |
Min. |
Max. |
Accuracy |
Note |
| Transceiver temperature |
DTemp-E |
ºC |
-45 |
+90 |
±5ºC |
1,2 |
| Transceiver supply voltage |
DVoltage |
V |
2.8 |
4.0 |
±3% |
|
| Transmitter bias current |
DBias |
mA |
0 |
127 |
±10% |
3 |
| Transmitter output power |
DTx-Power |
dBm |
-1 |
+6 |
±2dB |
|
| Receiver average input power |
DRx-Power |
dBm |
-27 |
-7 |
±2dB |
|
Notes:
1.When Operating temp.=0~70 ºC,the range will be min=-5,Max=+75
2. Internally measured
3. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the laser
Applications
10GBASE-ZR/10GBASE-ZW Ethernet
10G Fiber Channel
10GbE Data Center Switches and Routers
Description
• SFP+ 100km transceiver module
• Electrical interface compliant to SFF-8431
• Compliant with SFF-8472
• 10Gb/s serial optical interface compliant to 802.3ae
• 1550nm EML transmitter, APD photo-detector
• Built-in digital diagnostic functions
