Cisco SFP-10G-LR Compatible SFP+ Transceiver (SMF, 1310nm, 10km, DOM, LC)
Product Features
1. Hot pluggable
2. 10Gb/s serial optical interface
3. Up to 10km on SMF
4. SFP MSA package with duplex LC connector
5. Digital Diagnostic Monitor Interface
6. Very low EMI and excellent ESD protection
7. High transmission margin
8. +3.3V single power supply
9. CISCO and main brands coding available
Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter |
| Differential data input swing | VINPP | 180 | | 700 | mVpp | 1 |
| Transmit Disable Voltage | VD | VCC-0.8 | | Vcc | V | |
| Transmit Enable Voltage | VEN | Vee | | Vee+0.8 |
| Input differential impedance | Rin | | 100 | | Ω | |
| Receiver |
| Differential data output swing | Vout,pp | 300 | | 850 | mVpp | 2 |
| Output rise time and fall time | Tr, Tf | 28 | | | Ps | 3 |
| LOS asserted | VLOS_F | VCC-0.8 | | Vcc | V | 4 |
| LOS de-asserted | VLOS_N | Vee | | Vee+0.8 | V | 4 |
Note:
1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
2. Into 100Ω differential termination.
3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.
4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter |
| Operating Wavelength | λ | 1260 | 1310 | 1355 | nm | |
| Ave. output power (Enabled) | PAVE | -6 | | 0 | dBm | 1 |
| Side-Mode Suppression Ratio | SMSR | 30 | | | dB | |
| Extinction Ratio | ER | 4 | 4.5 | | dB | |
| RMS spectral width | Δλ | | | 1 | nm | |
| Rise/Fall time (20%~80%) | Tr/Tf | | | 50 | ps | |
| Dispersion penalty | TDP | | | 3.2 | dB | |
| Relative Intensity Noise | RIN | | | -128 | dB/Hz | |
| Output Optical Eye | Compliant with IEEE 0802.3ae |
| Receiver |
| Operating Wavelength | | 1270 | | 1600 | nm | |
| Receiver Sensitivity | PSEN2 | | | -14.4 | dBm | 2 |
| Overload | PAVE | | | 0.5 | dBm | |
| LOS Assert | Pa | -30 | | | dBm | |
| LOS De-assert | Pd | | | -18 | dBm | |
| LOS Hysteresis | Pd-Pa | 0.5 | | | dB | |
Notes:
1. Average power figures are informative only, per IEEE 802.3ae.
2. Measured at the BER less than 1E-12, back to back. The measure pattern is PRBS 231-1 with worst ER=4.5@ 10.3125Gb/s.
Product Descriptions
Olinkcom's OLSP311XL-CD10 is designed for 10Gb/s serial optical interfaces for data communications with single mode fiber (SMF) 1310nm. The transceiver can support 1.25 Gb/s to 11.1Gb/s. It is designed to optimize high performance and it is costly effective for customers’ solution in datacom.
Applications
● 10G Base-SR/SW at 10.3125G
● 10G Fiber Channel
● Other optical links
● 10G Ethernet
Compatibility
• Cisco 2360-48TD-S
• Cisco 3100 WS-CBS3110X-S-I
• Cisco 3100 WS-CBS3120X-S
• Cisco 3100 WS-CBS3130X-S
• Cisco 4500 WS-X4013+10GE
• Cisco 4500 WS-X4516-10GE
• Cisco 4500 WS-X45-SUP6-E
• Cisco 4500 WS-X45-SUP6L-E
• Cisco 4500 WS-X45-SUP7-E
• Cisco 4500 WS-X45-SUP7L-E
• Cisco 4500 WS-X45-SUP8-E
• Cisco 4500 WS-X45-SUP8L-E
• Cisco 4500 WS-X4606-X2-E
• Cisco 4500 WS-X4712-SFP+E
• Cisco 4900 ME-4924-10GE
• Cisco 4900 WS-C4928-10GE
• Cisco 4900 WS-C4948-10GE
• Cisco 4900 WS-C4948E
• Cisco Nexus 7000 N7K-F248XP-25E
• Cisco Nexus 7000 N7K-M108X2-12L
• Cisco Nexus 7000 N7K-M132XP-12
• Cisco Nexus 7000 N7K-M132XP-12L
• Cisco Nexus 7000 N7K-M224XP-23L
• Cisco Nexus 9000 N9K-C92160YC-X
• Cisco Nexus 9000 N9K-C9372PX
• Cisco Nexus 9000 N9K-C9372PX
• Cisco Nexus 9000 N9K-C9372PX-E
• Cisco Nexus 9000 N9K-C9372PX-E
• Cisco Nexus 9000 N9K-C9396PX
• Cisco Nexus 9000 N9K-C9396PX
• Cisco Nexus 9000 N9K-X9464PX
• Cisco Nexus 9000 N9K-X9564PX
• Cisco UCSB-5108-AC2
• Cisco UCS-FI-6248UP
• Cisco UCS-FI-6296UP
• Cisco UCS-FI-6324UP
